WD Licensed By Fender Replacement 21 Fret Neck For Telecaster Fat D, Maple
Shipping calculated at checkout.
Our newest Fender Licensed neck design is based off an early 1950's Broadcaster to give you a real fat D-shaped contour and fill your hand. It is been called a boat-neck, a baseball bat neck but commonly referred to as a 50s fat neck. It has a 10 in. radius, heel adjust truss rod, 1 5/8 in. nut width and comes unfinished so you can apply the finish you want. It is a one-piece maple neck w/ black dots. The heel is proper Fender spec 2 3/16 in. width. The 21 frets are a medium size Jescar wire which is equivalent to Dunlop 6150. The thickness at the first fret is a whopping .97 in. and 1.00 in. at the 12th fret for super comfort. The peghole bore size is vintage 11/32 in. and accommodate a vintage spec tuner w/ push-in bushing. The nut is not included.
- Fingerboard Radius = 10 in.
- Nut Width = 1 5/8 in.
- Profile Shape = U-Shape
- Fret type and count = Medium 6150 equivalent / 21 frets
- Tuner peghole size = 11/32 in.
- Binding = none
- Neck Finish = unfinished
- Truss Rod location = heel
- Skunk Stripe = yes
- Neck and Fretboard Type = One-piece Maple
- Heel Type = Standard Telecaster
- Orientation = Right-handed
- 1st Fret Thickness = 0.97 in.
- 12th Fret Thickness = 1.00 in.
- Fret Marker = Dot
- Allen Head Necks = 3.5mm
- Straight Head Necks = Standard Straight Head Screwdriver