EBS HD 360 Bass Amplifier Head

Regular price $1,669.00

The HD360's predecessor, the EBS 350, was the most sold EBS amp over the last decade and was used the worldover by artists both on stage and in the studio. The new HD360 takes the incredible amp a stage further offering a complete experience for the bassist in search of perfect tone.


The HD360 is a 100% solid state bass amp w/ highly transparent sound and powerful EQ. The HD360 delivers a crisp and pure sound experience thanks to its superb dynamics and consistent quality throughout the entire frequency range from the lowest sub-bass to the highest treble. Key improvements to this bass head include an improved preamp w/ better low frequency response and more head room. The HD360 also offers support for a 4 channel footswitch to control Character filter, Filter Bypass, Drive and Mute along w/ a mix-in filter for the effects loop and built in speaker simulation for the XLR output.

The EBS HD 360 amp is packed w/ stacks of extras including a compressor/limiter, 9V Phatom Power from the Input or Effect Loop Return, tube emulated drive, bright filter, overdrive stage in pure "class A" and a powerful accelerated MOSFET poweramp w/ a high efficieny cooling system. All this housed in a reinforced 2U rack-spaced, lightweight, steel chassis. The EBS HD360 is entirely designed, devloped and built in Sweden along w/ EBS' other premium gear.

Features/Specifications

  • 100% Solid State Design
  • Drive control
  • Tube Emulated Drive
  • ControlCompressor/Limiter
  • Powerful 4-band EQ
  • Serial and Parallel Effects loop
  • Mix-in filter for effects loop
  • Floating balanced XLR output
  • Pre/Post EQ, Ground lift &
  • Speaker Simulator for XLR output
  • Built-in speaker simulator
  • Remote controll connections to control Drive, Filters & Mute
  • 9 volt EBS Phantom Power System
  • 350 W pure MOSFET power

  • Input Impedance: 2 Mohms
  • Frequency Response: 20 - 20.000 Hz
  • Maximum Compression Ratio: (Compressor) 3:1

  • Tone Controls:
    • Bass: +/- 15 dB @ 100 Hz
    • Middle: +/-12 dB @ 50 - 3000 Hz, Q=0.5
    • Treble: +/- 15 dB @ 4 kHz
    • Bright: -0/+20 dB @ 10 kHz
  • Drive Control Gain: 0-30 dB
  • Drive Type: Solid State
  • Other Features: Character filters, Phantom power, Effects loop and Balanced Output
  • Minimum speaker impedance: 2 ohms
  • Dynamic Output Power: 350 W RMS
  • Continuous Output Power: 300 W RMS
  • Dimensions: (W x D x H) 19" x 13" x 2U (48cm x 33cm x 9cm)
  • Weight: 9 kg / 20 lbs