AER 2x100W Acoustic Bass Combo Amp 2 Chan w/ 4x8 Speaker/ Blac BASIC-PERFORMER-2, Special Order
The range and power to amplify acoustic guitars and basses right.
The Basic Performer Acoustic Guitar Amp with itsspecially designed construction and its 4 x 60 watt power is an idealtool for acoustic and electric bass-amplification. More than that, itsuits very well for all instruments with strength in the low register,e.g.: cello, harp etc. Apart from its two channels with three-band tone-control and mute-switch it offers a compressor and a notch filter.
Longscale lengths, huge body sizes, and resonance problems are only sometrouble zones of the acoustic instrument. The small twin-cone system isperfect - it is fast, provides a superior coverage for the criticalmid-range and has got enough substance in the bass range. The AER BasicPerformer has four 8"-twin-cone speakers which are individually poweredby four 60W power amps provide for the required surface area and thenecessary sound pressure level.
The special AER band-pass /bass-reflex cabinet design supports the reproduction of even the lowestfrequencies with definition. Hi-end preamps, proper filters andadditional professional sound design make the Basic Performer amplifier amultitalented all-round solution.
The sound characteristics ofthis AER amp are full range, open and light - breathing as well asgrumbling and surprisingly appropriate for far more instruments than thebass-related instruments such as harp, cello, accordion ¦ or even try ajazz guitar.
FEATURES
- Channels 1 + 2:
- Input: XLR-combination-socket with a socket for a 6.3 mm jack-plug and an XLR-mle-socket
- Channel Mute: switch to mute the channel
- Line/Mic: switch to adjust input sensitivity
- Line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups
- Mic: symmetrical microphone input with 24 V phantom power
- Clip: overload indicator
- Gain: input level control
- Bass: tone control for bass
- Middle: tone control for mid-range
- Treble: tone control for treble
- Input: socket for a 6.3 mm jack plug
- Channel Mute: switch to mute the channel
- Pad: damp-switch
- Clip: overload indicator
- Gain: input level control
- Color: mid-range contour filter, switchable
- Contour: control for mixing-in internally generated harmonics
- Bass: tone control for bass
- Middle: tone control for mid-range
- Frequency: mid-range frequency selection
- Treble: tone control for treble
- Front, bottom (from left to right):
- DI Pre/Post: DI-switch pre/post EQ
- 24V Phantom: 24 volt-phantom-power on/off
- 9V Phantom: 9 volt-phantom-power on/off
- Compressor: switches compressor on/off
- Threshold: control for the operational level
- Active: compressor operational
- Ratio: control for the compression-ratio
- ±1dB: indicates the reduction of amplification in dB
- ±3dB: indicates the reduction of amplification in dB
- ±6dB: indicates the reduction of amplification in dB
- ±12dB: indicates the reduction of amplification in dB
- Notch Filter: filter on/off
- Frequency: level-control for the frequency-selection
- Aux Return: level-control for aux return
- Effect Return: level-control for effect return
- Power: power indicator lamp
- Master: Solo - level-control for the overall volume, solo-setting,Ensemble - level-control for the overall volume, ensemble-setting
- Rear:
- Tape In: stereo input for CD and tape
- Phones: headphone output, stereo
- Tuner: output for a tuner
- Insert: insert-point, Tip = Send, Ring = Return, Line Out line-output
- DI Out: XLR-output pre-master
- Send: output for an external effect device
- Return: input for an external effect device or other signal, for example CD-player
- FS-Effect: footswitch effect on/off
- FS-Master: socket for a stereo footswitch, master-selection solo/ensemble
- FS-Mute: socket for a stereo footswitch to mute the channels
- Voltage Select: voltage selection switch
- Power: power supply with line-socket and fuse-holder